67
Main Menu
‘ Active’ tab
The ‘Active’ tab allows you to save and clear the track log as well as set up how the unit records
tracks.
Record Mode – ‘Wrap’ records over the oldest tracks when the track log reaches 100%. ‘Fill’ records a
track log until the track log is full (100%). ‘Off’ does not record tracks.
Interval – ‘Distance’ creates track points after a specifi ed distance has been traveled. ‘Time’ creates track
points after a specifi ed time has elapsed. ‘Resolution’ creates track points based upon the resolution. The
higher the resolution entered, the more points the unit creates to make the track.
Value – creates a track according to the ‘Interval’ and ‘Value’. Enter a specifi c distance, time, or resolu-
tion.
To clear the track log:
1. Press MENU twice to display the Main Menu.
2. Using the
ARROW KEYPAD, highlight ‘Track’, then highlight the ‘Active’ tab to the right.
3. Use the
ARROW KEYPAD to select the ‘Clear’ button and press ENTER/MARK.
4. Highlight the ‘OK’ fi eld and press
ENTER/MARK. Press QUIT to exit.
To save the entire track log:
1. Press the MENU key twice to open the Main Menu.
2. Use the
ARROW KEYPAD to highlight ‘Track’, then highlight the ‘Active’ tab to the right.
3. Use the
ARROW KEYPAD to select ‘Save’ and press ENTER/MARK.
4. A window pops up asking if you want to save the entire track log. To save the entire track, highlight
‘Yes’ and press
ENTER/MARK.
Track Tab
Saving a portion of the track log
Clearing the track log
190-00335-00_0A.indd 67 4/7/2004, 1:50:58 PM
