Filter
Top Products
Configuration
5-18 Issue 1 October 1998
User Access Code Overview continued
Password
Remote User
Access Code
Example
(see Figure 5.11
below)
Sequence of digits assigned by the administrator or
randomly generated by the Switch Management
Interface, assigned to a specific user which must be
entered at the remote site to gain access to the
DEFINITY ECS.
When a remote user attempts to “Go online”, they are
prompted for a password after the remote module
connects. They must enter their complete access code
which consists of their User ID, followed by a “9” (the
remote change digit), followed by their actual password.
For Peter Adams to access the DEFINITY ECS from his
remote module, he must enter the following access code:
Access Code: 0194333603
01 is the user ID assigned by the software
9 is the remote change digit
4333603 is the user password assigned by the
administrator
Figure 5.11. Access codes