To save multiple numbers per name when the selected memory is Phone, in standby mode, scroll down to the name to which
you want to add a number, and press Details. Press Options, and select Add number to add a new phone number to the name.
To delete contacts and all the numbers attached to them, in standby mode, press Menu, and select Contacts > Delete. Select
One by one or Delete all.
To delete a single number added to a name, in standby mode, scroll down to the desired name, and press Details. Scroll to the
number that you want to delete, press Options, and select Delete number.
To edit a name or number, in standby mode, scroll down to the desired name, and press Details. Press Options, and select Edit
name or Edit number. Edit the name or number, and press OK.
Settings for the contacts
In standby mode, press Menu, and select Contacts > Settings, and one of the following options:
• Memory in use — To select the memory that you want to use for your contacts.
• Contacts view — To select how the contacts are shown.
1-touch dialing
To assign a number to a 1-touch dialing key, press Menu in standby mode, select Contacts > 1-touch dialing, and scroll to the
1-touch dialing key number that you want.
Press Assign > Find, and select the name and the number that you want to assign.
If a phone number has already been assigned to the key, press Options, and select Change to change the phone number or
Delete to remove the assignment.
Other functions
In standby mode, press Menu, and select Contacts and one of the following:
• Service numbers — You can call the numbers that your service provider may have included in your SIM card (network services).
• Own numbers — You can view the numbers assigned to your SIM card if this is allowed by the card. Contact your service
provider for details.
Profiles
Press Menu, and select Profiles.
To change the profile, select the desired profile, and select Select.
To activate a profile for a certain time, select the desired profile and Timed. Set the time (up to 24 hours) when you wish the
profile setting to end. When the end time is reached, the previous profile, which was not timed, becomes active.
Tip: To activate a profile in standby mode, briefly press the power key, and select the desired profile.
You can edit the profile settings in the communicator interface of your device. See "Profile settings{No generated text before
found for '#comma'}" p.62.
Settings
Press Menu, and select Settings.
To adjust call settings, scroll to Call settings, and select:
• Call forward (network service) — select to direct your incoming calls to another number such as your voice mailbox.
For details, contact your service provider. Options not supported by your SIM card or your network operator may not be shown.
Select the option you want. For example, select Forward if busy to forward voice calls when your number is busy or when
you decline an incoming call.
To set the forwarding setting to on, select Activate, the desired phone number (a voice mailbox or another number), and the
timeout after which the call is forwarded if this is available for the forwarding option. To set the forwarding option to off,
select Cancel, or to check whether the forwarding option is activated or not, select Check status if this is available for the
forwarding option. Several forwarding options may be active at the same time.
You can see the corresponding indicators in standby mode.
• Anykey answer — select On if you want to answer an incoming call by briefly pressing any key except the power key, the
selection keys, and the End key.
• Automatic redial — select On to set the phone to make a maximum of 10 more attempts to connect the call after an
unsuccessful call attempt.
• 1-touch dialing — select On if you want to call the names and phone numbers assigned to the 1-touch dialing keys to
by pressing and holding the corresponding key.
C o v e r p h o n e
Copyright © 2004 Nokia. All Rights Reserved. 18
