Nokia E52 Cell Phone User Manual


 
is active. indicates that the connection is on
hold.
High-speed packet access (HSPA) is supported and
available (network service). The icon may vary
between regions.
indicates that the connection
is active.
indicates that the connection is on
hold.
You have set the device to scan for wireless LANs
(WLAN), and a WLAN is available.
A WLAN connection is active in a network that
does not have encryption.
A WLAN connection is active in a network that has
encryption.
Your device is connected to a computer with a USB
data cable.
The second phone line is being used (network
service).
All calls are forwarded to another number. If you
have two phone lines, a number indicates the
active line.
A headset is connected to the device.
A handsfree car kit is connected to the device.
A loopset is connected to the device.
A text phone is connected to the device.
Your device is synchronising.
You have an ongoing push to talk (PTT)
connection.
Your push to talk connection is in do not disturb
mode, because the ringing type of your device is
set to Beep once or Silent, or you have an
incoming or ongoing phone call. In this mode, you
cannot make PTT calls.
Write text
The input methods provided in the device may vary
according to different sales markets.
Traditional text input
indicates traditional text input.
and indicate the uppercase and lowercase.
indicates the sentence case, that is, the first letter
of the sentence is written in uppercase and all the other
letters are automatically written in lowercase.
indicates number mode.
To write text with the keypad, press a number key, 2-9,
repeatedly until the desired character is displayed. There
are more characters available for a number key than are
printed on the key. If the next letter is located on the same
key as the present one, wait until the cursor is displayed,
and enter the letter.
To insert a number, press and hold the number key.
26
Nokia E52 – The basics