Filter
Top Products
Settings
To set up video sharing, you need person-to-person and
3G connection settings.
Person-to-person connection settings
A person-to-person connection is also known as a Session
Initiation Protocol (SIP) connection. The SIP profile
settings must be configured in your device before you can
use video sharing. Ask your service provider for the SIP
profile settings, and save them in your device. Your service
provider may send you the settings or give you a list of the
needed parameters.
To add a SIP address to a contact card:
1. Select
> Contacts.
2. Open the contact card (or start a new card for that
person).
3. Select Options > Add detail > Share video.
4. Enter the SIP address in the format
username@domainname (you can use an IP address
instead of a domain name).
If you do not know the SIP address for the contact, you
can use the phone number of the recipient, including
the country code, to share video (if supported by the
network service provider).
3G connection settings
To set up your 3G connection:
• Contact your service provider to establish an agreement
for you to use the 3G network.
• Ensure that your device 3G access point connection
settings are configured properly.
Share live video or video clips
During an active voice call, select Options > Share
video.
1. To share live video during the call, select Live video.
To share a video clip, select Video clip and the clip you
want to share.
You may need to convert the video clip into a suitable
format to be able to share it. If your device notifies you
that the video clip must be converted, select OK. Your
device must have a video editor for the conversion to
work.
2. If the recipient has several SIP addresses or phone
numbers including the country code saved in the
contacts list, select the desired address or number. If
the SIP address or phone number of the recipient is not
available, enter the address or number of the recipient
including the country code, and select OK to send the
invitation. Your device sends the invitation to the SIP
address.
Sharing begins automatically when the recipient
accepts the invitation.
Options during video sharing
Zoom the video (available for sender only).
Adjust the brightness (available for sender only).
or Mute or unmute the microphone.
or Turn the loudspeaker on and off.
or Pause and resume video sharing.
Switch to full screen mode (available for receiver
only).
55
Phone