maximum duration is usually set to 30 seconds. For details
of the speech turn duration for your network, contact your
service provider.
Phone calls always take priority over push to talk activities.
Log in and exit PTT
When you start the push to talk (PTT) service, you are
automatically logged in and connected to the channels
that were active the last time you closed the application.
If the connection fails, to attempt to log in again, select
Options > Log in to PTT.
To exit PTT, select Options > Exit.
To switch to another open application , press and hold the
menu key.
Make and receive a PTT call
To make a PTT call, press and hold the call key as long as
you talk. To listen to the response, release the call key.
To check the login status of your contacts, in PTT, select
Options > PTT contacts > Contacts and from the
following:
•
— person available
•
— person unknown
•
— person does not want to be disturbed, but can
receive callback request
•
— person has PTT switched off
This service depends on your network operator and is only
available for subscribed contacts. To subscribe a contact,
select Options > Show login status.
Make a one-to-one call
Select Options > PTT contacts > Contacts. Select the
contact you want to talk to and Options > Talk 1 to 1.
Press and hold the PTT key the entire time you are talking.
When you have finished, release the key.
To talk to a contact, press and hold the PTT key also in other
views in the PTT application, for example, the Contacts
view.
To make a new phone call, first end the one-to-one call.
Select Disconnect.
Tip: Hold the device in front of you during a PTT call
so you can see the display. Speak towards the
microphone, and do not cover the loudspeaker with
your hands.
Make a group call
To call a group, select Options > PTT contacts >
Contacts, mark the contacts you want to call, and select
Options > Talk to many.
Answer a PTT call
To answer a one-to-one call, press the call key. To dismiss
the call, press the end key.
Tip: You can also make a one-to-one or group call
from Contacts. Select Options > PTT > Talk 1 to 1
or Talk to many.
Callback requests
To send a callback request:
62
Phone