Filter
Top Products
Contacts
2E. Contacts 71
Adding a New Group
Groups allow you to communicate simultaneously by
sending out a broadcast text message to every
member of a current group.
1. Highlight and press > Contacts.
2. Press OPTIONS (right softkey) > New Group to create
a new Group category.
3. Read the onscreen information and press START
(left softkey).
4. Add multiple entries (two or more) to your new
group by highlighting a name from the list and
pressing . This action places a check mark
alongside the name.
5. Press CONTINUE (left softkey) and enter a name for
the new group. (See “Entering Text” on page 30.)
6. Press SAVE (left softkey) to assign the selected
entries to the new group.
Selecting a Ringer Type for an Entry
Assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See “Ringer
Types” on page 46.)
1. Display a Contacts entry and press OPTIONS (right
softkey)
> Edit Contact.
2. Highlight the current ring type and press to
display the Select Ringer menu.
3. Select a ringer type, such as Get New Ringers,
Default Ringer, Downloaded Ringers, Other Ringers, My
Videos, or No Ringer.
4. Scroll through available ringers. (To hear a sample
ringer, highlight a ringer type.)
5. Highlight a ringer and press .
6. Press DONE (left softkey) to save the new ringer type.
Note
If several numbers are saved within a single Contacts
entry, you can select from these additional numbers
by using the left or right navigation keys.
Sprint M560.book Page 71 Monday, June 29, 2009 3:09 PM