HTC Diamond2 Cell Phone User Manual


 
Internet 133
To set your phone to turn off Wi-Fi automatically
Wi-Fi quickly consumes battery power. Manually turn off Wi-Fi on the
Communications screen when not in use. You can also set your phone to
automatically turn off Wi-Fi after a specified timeout period.
Tap Start > Settings > All Settings > Connections > Wi-Fi and then tap the
Wireless Networks button.
On the Configure Wireless Networks screen, tap Menu > Advanced.
Select the timeout period for automatically turning off Wi-Fi when your
phone is not connected to any wireless network.
GPRS/3G
Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send
and receive email on your phone. You will need a data plan to use your mobile
operator’s GPRS/3G network. Check with your mobile operator to find out about
GPRS/3G rates.
GPRS/3G settings are already preconfigured on your phone, and your phone is
ready to use your mobile operator’s GPRS/3G services. Do not change the settings
as this may cause services to stop working. If you need to add another GPRS/3G
connection on your phone, contact your mobile operator.
Dial-up
To set up a dial-up connection to your Internet Service Provider (ISP) on your phone,
you need the same settings that you normally use when you dial up from your
computer. This includes the ISP server phone number, your user name and password.
Tap Start > Settings > All Settings > Connections > Connections.
Tap Add a new modem connection.
In the Select a modem list, select Cellular Line, and then tap Next.
Enter the ISP server phone number, and then tap Next.
Enter your user name, password, and any other information required by your
ISP, and then tap Finish.
1.
2.
3.
1.
2.
3.
4.
5.