HTC RHOD500 Cell Phone User Manual


 
134 Programs
To set up a printer
You must configure your device to connect to a printer before you can start printing.
Tap Start > All Applications > JETCET PRINT 5.
If you are not in the Settings tab, tap the settings button ( ), and do either of the following:
Tap Add Network Printer to set up and connect to a shared network printer.
Note The device will wait continuously if you have entered an incorrect IP address while setting up a network
printer.
Tap Add Bluetooth Printer to set up and connect to a Bluetooth printer.
Note To learn how to set up a printer, refer to the JETCET PRINT help on your device.
To print a file
Tap Start > All Applications > JETCET PRINT 5.
Locate and select the type of file that you want to print (document, image, or e-mail/PIM) by tapping the
corresponding tabs on the left side of the screen.
Tap and hold the file that you want to print, and then tap Print on the menu.
Select a printer in the Choose a Printer list box, select the paper size, and then tap Next.
Choose the page layout in the list, and then tap Next to print the file.
Tip You can also print document and image files from File Explorer. To print, use File Explorer to locate the file you want
to print. Tap and hold the file, and then tap Print with JETCET 5 on the pop up menu.
12.4 JETCET Presentation
If you are away from your office and urgently need to make a presentation, you can use JETCET Presentation to
create a PowerPoint file and present it from your device.
JETCET Presentation also allows you to open and display presentations that were created in Microsoft
PowerPoint 97, PowerPoint 2000, PowerPoint 2002 (XP), or PowerPoint 2003.
Opening JETCET Presentation
Tap Start > All Applications > JETCET Presenter 5.
Creating a new presentation
When you open JETCET Presentation, the main screen displays a folder tree. Tap Menu > Cancel first and then
tap Menu > File > New to create a new presentation. You can then enter text, insert graphics, and add more
slides.
To add text to a slide
Tap Edit > Shape > Insert, tap , and then tap OK.
Drag your finger or stylus to draw a text box on the slide.
While the text box is selected, set the font type, size and style first and then start entering your text
using the hardware keyboard or on-screen keyboard.
While the text box is selected, tap Menu > Paragraph and then set the paragraph alignment,
indentation, and line spacing.
Tip To format the text with automated bullets or numbering, tap Menu > Paragraph > Bullets.
To modify the properties of the text box, select the text box and then tap Edit > Shape > Modify. You
can change the fill color, add or remove the border, and more. To wrap text inside the text box, tap the
Text Box tab and then select the Word wrap text in AutoShape check box.
To edit text
Select the text box that contains the text you want to edit.
Tap Edit > Text > Modify and then change your text. Tap within the text region to place the cursor
exactly where you want to start editing.
1.
2.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
1.
2.