Filter
Top Products
36 Using Phone Features
2.9 Using the HTC Touch Pro2 as a GSM Phone
Your wireless phone is set to Global mode by default enabling you to roam internationally on GSM networks.
You can manually change the device to GSM only or CDMA only mode. See “GSM settings” and “CDMA Phone
Settings” in this chapter for details.
GSM international roaming
Your HTC Touch Pro2 can operate in a number of countries on both CDMA (Code Division Multiple Access) and
GSM (Global Systems for Mobile) networks. Use your phone in GSM only or Global mode while in countries
serviced by GSM networks. You may want to use GSM only mode when you want to prevent the device from using
CDMA roaming networks and to access GSM/UMTS services. See “GSM Settings” for more information on GSM/
UMTS services. If you want to enable the device to select the network that is most accessible for your locale, select
Global.
Using the Verizon GSM SIM card
Your wireless device comes with a SIM card preinstalled which along with a Global Feature on your account,
enables you to make calls and access e-mail in GSM Networks while traveling overseas. Should your SIM card be
lost or damaged, please follow these instructions for the installation of your new SIM.
To remove the SIM card
Remove the back cover.
Remove the battery if it is installed.
Insert the tip of the stylus into the small hole
above the SIM card slot, and then push the SIM
card out with the stylus.
Slide the SIM card out from the slot with your
thumb or finger.
1.
2.
3.
4.
To install the SIM card
Remove the back cover. See Chapter 1 for
details.
Remove the battery if it is installed. See
Chapter 1 for details.
Locate the SIM card slot, then insert the SIM
card with its gold contacts facing down and its
cut-off corner facing out the card slot.
Slide the SIM card completely into the slot.
Tip Any contacts on the SIM card are automatically
added to Contacts.
1.
2.
3.
4.
Cut-off
corner