Pantech 5U000322C0A Cell Phone User Manual


 
82
02
03
01
04
05
06
07
08
83
TAKING A PHOTO
1. Slide the phone up and press the Camera Key
to turn on the camera.
2. Rotat e the phone counter-clockwise to landscape view, if necessary.
3. Aim the lens at the subject and make any necessary adjustments.
3
2
1
4
5
6
7
8
Number
Function
1Allows you to view the memory location for saving photos.
2
Allows you to view the number of photos you can take. The number of
photos may differ depending on the picture resolution.
3Switches to the camcorder.
4Allows you to
view photos in the My Pictures menu.
5
Zooms in or out. This function is only available when the picture
resolution is set under 2048x1536 (1536x2048).
6
Allows you to check the camera status and settings such as
resolution, camera view mode, and multi-shot number.
7 Adjusts the brightness.
8Allows you to change the camera settings.
4. Press the Camera Key
to take a photo . The photo is automa tically saved.
If Auto Save is set to off, the following options ar e available after taking a picture:
Erase: Deletes the captured photo.
Save: Saves the captured photo.
Set As: Sets the captured photo as wallpaper or picture ID image.
Send: Sends the captured photo.
TAKING A PHOTO IN SMILE SHOT MODE
1. Slide the phone up and press the Camera Key to turn on the camera.
2. Tap
.
3. Tap
OFF
next to
Smile Shot
.
4. Tap
Save
.
5. Rotate the phone counter-clockwise to landsca pe view, if necessary.
6. Aim the lens at your subject.
Your phone recognizes people in an image and detects their smiles. When the
subject smiles, the phone automa tically takes a photo.
LINKING A CAPTURED PHOTO TO YOUR CONTACT
With Face Tag , you can take a photo and link it to your contact to make calls or
send messages from photos.
1. Slide the phone up and press the Camera Key to turn on the camera.
2. Tap .
3. Tap
OFF
next to
Face Tag
.
If Auto Save is set to on, deactivate it before using the face tag function.
4. Tap
Save
.
5. Rotate the phone counter-clockwise to landsca pe view, if necessary.
6. Aim the lens at your subject and make any necessary adjustments.
7. Press the Camera Key
to take a photo.