Pantech P2000 Cell Phone User Manual


  Open as PDF
of 88
 
Getting started
18 19
Installing/removing SIM card and
battery
1.Removethebattery
coverfromtheunit.To
tthebatterycover,put
it on the guide rail and
push up.
2.InserttheSIMcard
into the slot. The gold
contactsoftheSIMcard
should go against the
metal contacts of the
phone.
Put the contacts of the
battery into the hole
located at the bottom of
the unit and then insert
and press the upper side of the battery
untilyouhearthe“click”.Makesureyou
align the gold contacts at the battery
end with contacts on the phone. If the
contacts at the battery are not properly
aligned, damage could occur to the
phone and the battery.
Incorrect
Correct
3.Toremovethebattery
push the bottom of the
battery to upwards (1)
andremove(2)the
battery.
PushtheSIMcardinthe
arrow direction as shown.
To charge your battery
1. To charge, open the
protectivecoveronthe
top right side and
connect the charger
adapter.
The arrow on the charger
has to face the top of the phone.
Incorrect
Correct
Incorrect
Correct
2.Toremovetheadapter
connection press the
adapter’ssidebuttons
(1) and pulling the
adapter away (2).
 previous next