Filter
Top Products
127
•
At the Tools menu, press (for Voice Service), and for Voice
Command.
Note: You can also set your phone to start VoiceSignal when you open the phone. See “Voice Launch” on
page 131. for more information.
VoiceSignal includes the following commands:
– Call — Lets you dial the phone by saying any name stored in your contact list,
without ever having to record, or “train” that name. VoiceSignal automatically
voice-activates all your contacts, even if you have hundreds of them stored on your
phone. You can also dial any telephone number, even if it is not stored in your
contact list, by saying the digits in the number. (See “Making a Call — Voice
Dialing” on page 25 for more information.)
– Send Text — Lets you launch the Create Txt Msg screen. (See “Create and Send
Text Messages” on page 65 for more information.)
– Send Picture — Lets you launch the Create Pic Msg screen. (See “Send Picture
Messages in Camera Mode” on page 66 for more information.)
– Lookup — Lets you look up and display contact information for any name stored in
your Contacts list by saying the name. (See “Finding a Contacts Entry” on page 52
for more information.)
– Go to — Lets you access all of the Main Menus on your phone.
– Check — Lets you check your phone's status (that is, network coverage, signal
strength, and battery in the same report), network coverage, signal strength,
battery, and phone number.
Note: Speaking clearly, say the command that you want to use. If, after a few seconds, the device has not
recognized a command, it prompts you to repeat the command. If, after a few more seconds, it still
has not recognized a command, it tells you “Sorry, no match found,” and cancels voice recognition.
Voice Command Tips:
•
Make sure you wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking on the phone.
Voice-Activating Your Contacts List
When you first start VoiceSignal, it reads your Contacts list and voice-activates all
the names stored there. When you have add or change contacts, VoiceSignal
automatically reloads and voice-activates the entire list.