Filter
Top Products
Getting Started 6
Activating Your Phone
Turn Your Phone On
1. Open your phone by pushing the slide up.
2. Press and hold the key.
3. The phone begins searching for a network
signal.
4. Once the phone finds a signal, the time, date
and day appear in the bottom of the display.
5. You’re now ready to open the slide on your
phone and to place and receive calls.
Tip: Your phone has an internal antenna. Do not touch the phone
case over the antenna while using your phone as this can affect
call quality and can cause the phone to operate at a higher
power level than is necessary.
Note: If you are outside of your carrier’s coverage or roaming area, the No Service icon ( ) appears at
the top of the phone’s display. If you cannot place or receive calls, try later when service is available,
or at another location.
Turn Your Phone Off
1. Push the slide up to open your phone.
2. Press and hold the key for two or more seconds. Your phone powers
off.
Note: If your phone is on and you press for less than one second, the phone will not power off. This
prevents your phone from being turned off accidentally.
Remove the Battery
Important!: You must unplug the Travel Adapter (if it is connected) before removing the battery from the
phone during charging to avoid damage.
1. If your phone is on, do the following:
• Push the slide up to open your phone.
• Press and hold the key to turn off the phone.
• Close the phone.
Press
Press
Antenna