Filter
Top Products
149
•
Store Emergency Numbers
1. At the Settings menu, press (for Phone Settings) and for
Security. You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2. Enter the lock code, then press for Emergency #.
3. Press , , or to select from the three emergency number
entries.
4. Enter an emergency number (up to 32 digits in length).
5. Press the key to save the number that you entered.
• Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number.
2. Press the key to place the call.
Resetting Your Phone
Reset Phone returns all setup options to their factory default.
1. At the Settings menu, press (for Phone Settings) and for
Security. You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2. Enter the lock code, the press for Reset Phone. A prompt appears in
the display asking if you wish to restore default settings (except for the
Contacts and Voice Dial).
3. Press the Yes (left) soft key ( ) to restore default settings or press the
No (right) soft key ( ) to return to the Security sub-menu.
Erase All Entries
Erase All Entries erases all information from your Contacts list.
Note: To completely remove any personal information stored on your device, see “Precautions for Transfer
and Disposal” on page 179.
1. At the Settings menu, press (for Phone Settings) and for
Security.
The “Enter code” prompt appears in the display.
2. Enter the four-digit lock code using the keypad.