Filter
Top Products
157 SAMSUNG SPS1000
TIME PERIOD
Memory allocation determines whether there are 24, 48, or 96 time periods. Time periods
will default to hourly periods if 24 periods are selected in memory allocation; 30 minute
periods if 48 periods are selected; 15 minute periods if 96 periods are selected. Periods can
be set to custom lengths using this program. If fewer periods are needed than are available,
unneeded periods can be made inactive so that they will not appear on reports. To make
inactive a period, replace the "Y" (active) for the period with an "N" (inactive). All time units
are based upon a 24 hour clock
# OF PERIODS SET IN MEMORY
This is the initial setting of the number of periods
TIME PERIOD
P-MODE PROGRAMMING MENU L1
1. PLU
2. PLU STATUS GROUP
3. GROUP
4. FUNCTION KEY
5. SYSTEM OPTION
6. TAXES
7. MESSAGES
8. WINDOW LOOK UP (WLU)
9. TIME PERIOD
10. EMPLOYEE
11. AUTHORITY LEVEL
12. PRINTER TABLES & KV ROUTING
!
!!
! ENTER PAGE UP/DN
↑↓
TIME PERIOD PROGRAMMING L1
# OF PERIODS SET IN MEMORY : 24
1 (
Y) 00:00 – 00:59 13 (Y) 12:00 – 12:59
2 (Y) 01:00 – 01:59 14 (Y) 13:00 – 13:59
3 (Y) 02:00 – 02:59 15 (Y) 14:00 – 14:59
4 (N) 03:00 – 03:59 16 (Y) 15:00 – 15:59
5 (N) 04:00 – 04:59 17 (Y) 16:00 – 16:59
6 (N) 05:00 – 05:59 18 (Y) 17:00 – 17:59
7 (N) 06:00 – 06:59 19 (Y) 18:00 – 18:59
8 (N) 07:00 – 07:59 20 (Y) 19:00 – 19:59
9 (N) 08:00 – 08:59 21 (Y) 20:00 – 20:59
10 (N) 09:00 – 09:59 22 (Y) 21:00 – 21:59
11 (N) 10:00 – 10:59 23 (Y) 22:00 – 22:59
12 (Y) 11:00 – 11:59 24 (Y) 23:00 – 23:59
ESC Y/N ENTER PAGE UP/DN
↑↓←→