Filter
Top Products
25 SAMSUNG SPS1000
DISPLAY MESSAGES
AMOUNT REQUIRED
This operation requires an amount entry.
BAD VALUE
The number entered isincorrect for the task being performed.
BUFFER FULL
The buffer for soft check, hard check, or buffered receipt has reached capacity. For hard checks, the
operator must press the SERVICE key to print the items and clear the buffer. The operator must then pick up
the previous balance again in order to continue with finalisation. In a soft check environment, this message
will appear when the check has reached capacity (maximum lines stored). The register will require the sale
to be finalised with the option of printing a bill if required
BUFFER EMPTY
The buffer for WLU, REPEAT or PAID RECALL is empty.
BUSY
Destination register is busy (pre poll memory is in use). Requires a clear command from the P.C. or
Register.
CASH DECLARATION REQUIRED
Cash declaration has been programmed as compulsory, and must first be performed before reports
CASH-IN-DRAWER EXCEEDED
The programmed Cash-In-Drawer limit has been exceeded.
CHECK# ASSIGNED AUTO
The operator has attempted to open a new guest check by assigning a check number. The register has been
programmed to generate its own check numbers.
CHECK# REQUIRED !
This register has been programmed to force check number entry to begin a transaction. An existing guest
check must be recalled, or a new one started.
CONDIMENT REQUIRED!
This PLU has been programmed to require a condiment entry.
CRC ERROR
An error has occurred in the block check sum while transferring data in IRC mode.