Filter
Top Products
35 SAMSUNG SPS1000
MULTIPLICATION LIMIT EXCEEDED
The entered multiplier exceeds the direct multiplication maximum digit. Please check the GENERAL
FUNCTION OPTIONS programming.
DISPLAY MESSAGES
TAB OF FIELD2 TOO BIG
TAB OR DECIMAL POINT OF FIELD 2 should be less than or equal to LENGTH OF FIELD 2.
NON-PLU CODE RANGE OVER
The digit of PLU code according to programming exceeds the digit of real PLU code.
TARE ENTRY NOT ALLOWED
Tare weight entry is not allowed. Please check the SCALE key programming.
MISC TEND REQUIRED
Any of the 16 MISC TEND keys is required for the task being performed.
NOT SCALEABLE PLU
This PLU is not a scaleable PLU. Please check the programming of PLU status group linked to this PLU.
EJ BUFFER FULL
Electronic Journal buffer is full.
MUST BE START<=END IN RANGE
START should be less than or equal to END in one range.
RANGE OVERLAP
START should be more than END of the preceding range.
FINAL END SHOULD BE 9 OR 99
END of the final range should be 9 or 99.
NOT PLU
The key that will be relocated should be PLU key.
NOT WLU
The key that will be relocated should be WLU key.
PRINT KEY REQUIRED