Filter
Top Products
40 SAMSUNG SPS1000
ERROR CLEAR INIT PROCEDURE
The initial clear function allows you to exit any register activity and return to a beginning or cleared
state. any transaction in progress will be exited and totals for that transaction are not updated.
Here are some reasons you may want to perform an initial clear:
•
The register is in an unknown state, and you wish to exit the current
program or transaction without following normal procedures.
•
You have performed a function that includes a compulsory activity,
such as validating or printing, and you wish to bypass the
compulsory activity.
•
An initial clear may be necessary as part of servicing, or
troubleshooting an SPS 1000 register or system.
Contact your SAMSUNG dealer first if you have questions about operating or programming your
SPS-1000.
TO PERFORM AN INIT CLEAR
1. Turn the power switch located on the right side of the register to the
OFF
position.
2. Turn the key lock to the
PGM
key lock position.
3. Press and hold the key position where the
CASH
key is located on the
default keyboard layout.
4. Continue to hold the
CASH
key whilst turning the power switch to the
ON
position.
5. The P-MODE PROGRAMMING MENU will display when the initial clear
is complete.
1
SUB-
TOTL
32
4
CHEQUE
65
7
MISC
TEND 1
9
8
0
CASH
.
00
TO INITIALIZE:
Press and hold this key position
during power-up in P-mode.