Filter
Top Products
41 SAMSUNG SPS1000
NOTE
it may be required in some instances after a program init procedure to return to the REG position and press a
tender key to complete the procedure
KEYBOARD CLEAR PROCEDURE
CAUTION: Distribute the S-Mode key only to those you may want to perform
this function.
The keyboard clear function allows you to reset the custom keyboard back to factory settings
Here are some reasons you may want to perform an initial clear:
•
Some or all of the essential Functions keys have been
inadvertently programmed as other functions
•
The custom-programmed keyboard is not required.
Contact your SAMSUNG dealer first if you have questions about operating or programming
your SPS-1000.
TO PERFORM KEYBOARD CLEAR
1. Turn the power switch located on the right side of the register to
the
OFF
position.
2. Turn the key lock to the
S-MODE
position (one position clockwise
from the
PGM
key lock position).
3. Press and hold the key position where the
SUB-TOTL
key is
located on the default keyboard layout.
4. Continuing to hold the
SUB-TOTL
key whilst turning the power
switch to the
ON
position.
5. The S-MODE PROGRAMMING MENU will be displayed when this
procedure has been completed.