Filter
Top Products
181 SAMSUNG SPS1000
TIME ACTIVATED – KITCHEN PRINTING
Because it is sometimes necessary to change kitchen printer routing depending upon the
time of the day, (for example, separate hot and cold food kitchens may be active during
lunch and a single kitchen active during dinner) you can make assignments for four different
periods. The active routing period can be controlled automatically Routing can also be
allocated to be activated centrally using one master terminal or each terminal independent. If
kitchen printing changes are not required to be timed, the routing can be changed in reigster
using either one of the thress analysis keys or the KP routing key.
KP TIME PERIOD
It is possible to switch what kitchen printers are in use, and change the routing of products depending on the time
of day. The four periods are allocated in printer programming with the appropriate printers and then the
following automation can be programmed
START TIME FOR EACH OF THE FOUR PERIODS
This is the time the switch to a different kitchen period will change
END TIME FOR EACH OF THE FOUR PERIODS
This is the time the switch to the new range of kitchen printer will end.
KP TIME PERIOD PROGRAMMING L1
PERIOD START/END TIME
----------- --------------------------
1 09:00 – 10:59
2 11:00 – 12:59
3 13:00 – 15:59
4 16:00 – 23:00
ESC Y/N ENTER PAGE UP/DN
↑↓←→