Filter
Top Products
202 SAMSUNG SPS1000
NON PLU CODE PROGRAM
The NON-PLU Code program must be set if you wish to scan UPCs (using the EAN 13
code) with embedded prices, weights or quantities.
Within the EAN 13 code, the first two digits (part a) are used as an identifier and the last digit
(part c) is used as a check digit. The remaining 10 digits (part b) contain the product code
and the price (or weight or quantity).
0 2 1 2 3 4 5 0 0 2 5 0 0
There are 11 identifier numbers available for non-PLU code programming: “02” and “20” through “29”.
The purpose of this program is to define the format of the 10 digit part b for each possible identifier.
For example:
•
The structure of Non PLU identifier “02” can be defined to use 5 digits for the product code and 5
digits for the price.
•
The structure of Non PLU identifier “20” can be defined to use 6 digits for the product code and 4
digits for the price.
NON-PLU CODE PROGRAMMING L1
ESC ENTER PAGE UP/DN
↑↓
1. PLU#02~
2. PLU#20~
3. PLU#21~
4. PLU#22~
5. PLU#23~
6. PLU#24~
7. PLU#25~
8. PLU#26~
9. PLU#27~
10. PLU#28~
11. PLU#29~
NON-PLU# 1 (PLU#02~) PROGRAMMING L1
LENGTH OF FIELD 1 (=PLU CODE)
0
LENGTH OF FIELD 2 0
CONTENT OF FIELD 2 PRICE
USE PRICE CHECK DIGIT? N
TAB OR DECIMAL POINT OF FIELD 2 0
ESC Y/N ENTER PAGE UP/DN
↑↓←→
a) identifier
b) product code & price
c) check digit
P-MODE PROGRAMMING MENU L1
13. INGREDIENT INVENTORY
14. TIME ACTIVATED FUNCTIONS
15. PRODUCT MIX GROUPS
16. MIX & MATCH TABLE
17. CUSTOM REPORT
18. STRING REPORT
19. PLU STOCK
20. PLU MINIMUM STOCK
21. COPY PROGRAM
22. PROGRAM FILE DOWNLOAD
23. P-MODE PROGRAM SCAN PRINTING
24. NON-PLU CODE
" ENTER PAGE UP/DN
↑↓