Filter
Top Products
251 SAMSUNG SPS1000
This is used to transmit a ROM from the PC to one terminal, the s-mode flash ROM download will transmit from
one terminal to another.
CAUTION: This will reset all programmed information, setting the machine
back to the factory default settings
This will reset the machine back to factory settings, ready to commence program. There a two options for
resetting, the first will load default setting into the terminal, ready to commence programming. The second will
prompt for user input of the file sizes. The first option is ideal for setting up demonstrations, the second is
normally used for custom installations
This will erase the existing ROM and Transmit a new flash ROM (which has been download from the
P.C.) down the IRC network
TO PREPARE RECEIVING TERMINAL
1. Turn the power switch located on the right side of the register to
the OFF position.
2. Turn the key lock to the
S-MODE
position (one position clockwise
from the PGM key lock position).
3. Press and hold the key position where the
CASH
key is located on
the default keyboard layout.
4. Continue to hold the
CASH
key whilst turning the power switch to
the ON position. (see figure 1)
5. Press each of the four corner keys TOP LEFT, BOTTOM LEFT,
TOP RIGHT, BOTTOM RIGHT (see figure 2)
6. The screen will say download and is now waiting for the download
procedure to be activated on the transmitting terminal.
Figure 1.
1st
Figure 2.
3rd
1
SUB-
TOTL
32
4
CHEQUE
65
7
MISC
TEND 1
98
0
CASH
.
00
2nd
4th
Press and hold
this key position
during power-up
in S-MODE
Press each of
the four
corner keys in
turn