Filter
Top Products
168 SAMSUNG SPS1000
SYSTEM PRINTER CONFIGURATION
Used to assign a port for each printer. Then assign printer number (1-40), give it a 10 character
descriptor (i.e. salad prep, receipt, or detail) and identify the port # and the register # to which it is
attached. In addition, you can identify a back-up location for information designated to go to the
printer. (For example, if the salad printer is not functioning, then could be sent to a different printer.)
PRINTER NO.
This is a sequential number generated by the system that will be used to refer to the printer throughout
the system
DESCRIPTOR
This is a description of the task the printer will be carrying out i.e. Receipt-till 1, KP-till 2
REG#-PORT# MAIN
This is the register number and the physical port number on that register the printer is connected to.
This is the MAIN output which will be used under normal circumstances
REG#-PORT# BACKUP
This is the register number and the physical port number on that register the printer is connected to.
This is the Backup output which will be used when there is no access to the normal route
SYSTEM PRINTER CONFIGURATION ALPHA
MAIN BACKUP
PRINTER DESCRIPTOR REG#-PORT# REG#-PORT#
------------- ------------------- ------------------ -------------------
# 1
RCPT TILL1 01-2 02-2
# 2 DETL TILL1 01-1 02-1
# 3 RCPT TILL2 02-2 01-2
# 4 DETL TILL2 02-1 01-1
# 5 KITCHEN 1 02-1 00-0
# 6 00-0 00-0
# 7 00-0 00-0
# 8 00-0 00-0
# 9 00-0 00-0
#10 00-0 00-0
!
!!
!
ESC Y/N ENTER PAGE UP/DN
↑↓