Filter
Top Products
45 SAMSUNG SPS1000
PROGRAM RESET
CAUTION: This will reset all programmed information, setting the machine
back to factory default settings
This procedure will reset the machine back to factory settings, ready to commence program.
There a two options for resetting; the first will load the default settings into the terminal,
ready to commence programming. The second will prompt for user input of the file sizes.
The first option is ideal for setting up demonstrations; the second is normally used for
custom installations
TO A COMPLETE PROGRAM RESET
1. Turn the power switch located on the right side of the register to
the
OFF
position.
2. Turn the key lock to the
S-MODE
position (one position clockwise
from the
PGM
key lock position).
3. Press and hold the key position where the
CHEQUE
key is located
on the default keyboard layout.
4.
Continue to hold the
CHEQUE
key whilst turning the power switch
to the
ON
position.
(see figure 1)
5. Press each of the four corner keys
TOP LEFT, BOTTOM LEFT, TOP RIGHT, BOTTOM RIGHT
(see
figure 2)
6. You will be prompted as to whether you wish to load the default
memory allocation, this is ideal for demonstrations as all defaults
are set, and the terminal is immediately ready for feature
programming. The alternative is to answer no and you will be
prompted to enter your own file sizes, ideal for setting up custom
installations. (see following for custom allocation definitions)
Figure 1.
1st
Figure 2.
3rd
1
SUB-
TOTL
32
4
CHEQUE
65
7
MISC
TEND 1
98
0
CASH
.
00
2nd
4th
Press and hold
this key
position
during power-
up in S-
MODE
Press each of
the four
corner keys in
turn