Filter
Top Products
80 SAMSUNG SPS1000
SERIAL PORT PARAMETERS - DEFINITIONS
PORT DESCRIPTION
This is an area in which you can type your own description of the task the port is carrying out, i.e. SHOP
PRINTER, HAND SCANNER etc.. This description is for your own reference purposes.
BAUD RATE
This is the Baud Rate of the device, the communications speed of the peripheral
DATA BITS
This is a standard peripheral definition, the information is normally supplied with the device
STOP BITS
This is a standard peripheral definition, the information is normally supplied with the device
RETRIES
This is the number of attempts that will be made to communicate with a device before failure is declared the
default settings are satisfactory for most commonly used peripherals.
FEED LINES BEFORE PRINTING / AFTER PRINTING
This the number of lines to be fed before or after the printing is started, this will make the receipt longer, helping
format the ticket for non cutter printers.
PRINT BITMAP?
This allows printing of the previously downloaded graphics logo if the option has been defined as
available within the memory allocation. Note the initalisation code for the graphics printer should be
deleted using s-mode option, printer driver selections
LOGO SIZE (0 – 3)
This relates to the P.C. downloaded bit map image, each number relates to a different print format for the image.
LOGO SIZE FORMAT
LOGO SIZE FORMAT
0 NORMAL 1 DOUBLE WIDTH
2 DOUBLE HEIGHT 3 QUADRUPLE
LINES ON “HARD” SLIP
This is the number of lines that can be printed on a loose paper printer, before a prompt for the next page appears
CUTTING AFTER PRINTING?
When a printer has the capabilities of auto cut, this option will decide if that feature is to be used, i.e. for receipts
it is commonly set to yes, however detail journal printers do not require this option