248 SAMSUNG SPS1000
BITMAP FILE DOWNLOAD
This provides a method of printing a graphics logo on the printer, please ensure the necessary memory allocation
are set at the initial stages as these cannot be re-selected once programming of the terminal has commenced.
PREPARE THE SPS1000 BITMAP DOWNLOAD
•
In the S-Mode MEMORY ALLOCATION, set to Y the STORE BITMAP item..
This setting must be carried during the initial program reset
procedure.
•
In the S-Mode SERIAL PORT DEVICE SELECTIONS, set the port where PC is
connected to POLLING.
BIT MAP FILE SPECIFICATION
•
This procedure states how to save bit map files made using the Microsoft Paint software, and then
how to down load them to the SPS-1000
•
The Maximum file size which can be downloaded to the SPS-1000 is 12288 bytes.
•
The Image dimensional definition is as follows
X * 8 pels (pixels)
Y * 8 pels (pixels)
The possible values of X and Y and the product of X and Y are:
1<= X <= 255
1<= Y <= 48
•
HOWEVER
, the product of X and Y must be
1<= X*Y <=1536
•
A good size to use is 432 pixels wide by 144 pixels high.