Filter
Top Products
167 SAMSUNG SPS1000
PRINTER TABLES AND KV ROUTING
The printing system of an SPS 1000 register or system of registers is completely flexible. Up to 40
printers can be defined and connected to any available serial port on any register within a system.
Multiple printer functions can be assigned to the same printer, giving added flexibility. Before
programming here, you must
•
See "Serial Port Device Selections" in S-Mode Programming to define the type of device that is
connected
•
See "Define Serial Port Parameters" in S-Mode Programming to match the baud rate/parity/etc.
between the serial port and the printer. This program also controls the feed lines before and after
printing, the logo size, and cutting options.
•
See "Printer Driver Selections" if you are using a printer other than the printers with predefined
drivers, or if you need to customize a driver for a printer.
•
Next, assign a port for each printer, assign printer number (1-40), give it a 10 character descriptor
(i.e. salad prep, receipt, or detail) and identify the port # and the register # to which it is attached.
In addition, you can identify a back-up location for information designated to go to the printer.
•
Finally, proceed with the parts of this program that pertain to your application:
•
Because it is sometimes necessary to change kitchen printer routing depending upon the time of
the day, (for example, separate hot and cold food kitchens may be active during lunch and a single
kitchen active during dinner) you can make assignments for four different periods. The active
routing period can be controlled automatically Routing can also be allocated to be activated
centrally using one master terminal or each terminal independent
SYSTEM PRINTER CONFIGURATION
Every printer used within the system must be allocated a printer number within this menu option
KITCHEN VIDEO ROUTING
The video display system must be activate within this menu option
KITCHEN PRINTER ROUTING
Each route required for printing must be allocated a printer number within this menu option
RECEIPT PRINTER ROUTING
Each receipt printer within the system must be allocated within this menu option
DETAIL PRINTER ROUTING
Each detailed journal printer within the system must be allocated within this menu option
PRINTER & KV ROUTING MENU L1
ESC ENTER PAGE UP/DN
↑↓
1. SYSTEM PRINTER CONFIGURATION
2. KITCHEN VIDEO ROUTING
3. KITCHEN PRINTER ROUTING
4. RECEIPT PRINTER ROUNTING
5. DETAIL PRINTER ROUTING
P-MODE PROGRAMMING MENU L1
1. PLU
2. PLU STATUS GROUP
3. GROUP
4. FUNCTION KEY
5. SYSTEM OPTION
6. TAXES
7. MESSAGES
8. WINDOW LOOK UP (WLU)
9. TIME PERIOD
10. EMPLOYEE
11. AUTHORITY LEVEL
12. PRINTER TABLES & KV ROUTING
!
!!
! ENTER PAGE UP/DN
↑↓