Filter
Top Products
30
your phone. You will notice that your information was copied to
the phone.
Customizing Connection Settings
To establish a connection between your computer and the phone,
you must enable the connections you want to use in the
ActiveSync
®
program. By default, all connections are enabled.
1. From the ActiveSync
®
window on your computer, select
File
➔
Connection
Settings...
2. Change the connection settings.
Note:
If your phone is not connected to the computer, click this button to
establish a connection.
3. Click the
OK
button.
Connecting Your Phone to a Computer
To connect the phone to your computer, you can choose one of
the following ways:
•
Using a PC data cable
•
Using a Bluetooth connection
Connecting with a PC data cable
Connect one end of the PC data cable (included with the i627
handset) to the jack on the left side of the phone and the other
end to the USB port on your computer.
Note:
USB mode of your phone must be set for Microsoft
®
ActiveSync
®
.
Select
Start
➔ More
➔ Settings
➔ Connections
➔ USB. Then change
the mode to
ActiveSync
.
The connection is established and the Microsoft
®
ActiveSync
®
window displays. The synchronization automatically begins.
Tip:
When an error occurs in a USB connection, activate the DHCP Client
service, or deactivate the firewall or VPN environment.
USB hubs and laptop docking stations have not exhibited consistent
stability with Windows
®
Mobile powered devices and ActiveSync
®
.
You can connect the device to the PC USB ports if you experience
connection drops or inability to connect through a USB hub or docking
station.
If your phone is not
connected to the
computer, click this
button to establish a
connection.
i627.book Page 30 Wednesday, February 18, 2009 3:26 PM