Filter
Top Products
43 1998 Nokia Mobile Phones. All Rights Reserved.
1Once in the Settings submenu,
scroll with or to Alarm clock
and press Select.
2If the alarm was off, the phone asks for
the desired alarm time. Key in the time
in hours and minutes and press OK.
If the alarm was on, scroll to On or Off
and press OK: Selecting On allows you
to change the alarm time. Selecting
Off sets off the alarm.
When the alarm time expires
The phone sounds an alert tone (unless In-
coming call alert is set to “Off” or “Beep
once”), shows Alarm! and flashes its
lights. If you press Stop or switch off the
phone, the alarm is set off.
If you press any other key or let the phone
alarm for one minute, the phone stops
alarming for five minutes and resumes
thereafter. You can end this ‘snoozing’ by
pressing Stop or switching off the phone.
If the alarm time expires while the phone
is switched off, the phone will switch itself
on and start alarming. If you press Stop,
the phone will ask whether you want to ac-
tivate the phone for calls. Press Yes to ac-
cept or No to switch off the phone.
N
OTE: While the phone is snoozing, only
calls to the emergency number 112 can be
made.
Clock (Menu 4-2)
The phone is provided with a clock. The
current time is always shown, except
when you are in the Phone book or menu
functions.
The clock also serves the following func-
tions: Messages (Menu 1), Call register
(Menu 2), Alarm clock (Menu 4-1), and
Calendar (Menu 8).
1Once in the Settings submenu,
scroll with or to Clock and
press Select.
2Scroll to one of the following functions
and press OK.
Show/Hide clock
Allows you to set the time display on or
off.
Set the time
Key in the time and press OK.
Time format: Allows you to select
the 12-hour or 24-hour time format.
Scroll to either format and press OK.
N
OTE: If the battery is removed from the
phone for a longer time, you may need to
set the time again.
Call settings (Menu 4-3)
To enter this submenu:
• Once in the Settings menu, scroll
with or to Call settings
and press Select.
Anykey answer (Menu 4-3-1)
When this function is set on, you can an-
swer an incoming call by pressing any key
briefly, except and .
1Once in the Call settings sub-
menu, scroll with or to Anykey
answer and press Select.
2Scroll to On or Off and press OK.