Filter
Top Products
48 1998 Nokia Mobile Phones. All Rights Reserved.
Erase
Allows to remove the name and
phone number from the list.
Press OK to erase or Back to
cancel the operation.
TIP: You can call a listed phone
number by pressing twice.
Add entry
Adds a new name and phone
number to the list. Key in the PIN2
code and press OK. Key in the name
and press OK. Key in the phone
number and press OK.
Erase all
Removes all phone numbers from
the list. Key in the PIN2 code and
press OK. Next, press OK to remove
or Back to cancel the operation.
N
OTE: When Fixed Dialling is set on, calls
may be possible to certain emergency
numbers in some networks (e.g. 112 or
other official emergency number).
Closed user group (Menu 4-5-4)
This network service allows you to set the
phone to accept calls to and from a se-
lected group of people (‘closed user
group’) only.
You may be a member of up to ten groups.
For details, contact your service provider.
1Once in the Security settings
submenu, scroll with or to
Closed user group and press
Select.
2Scroll to one of the following options
and press OK:
Off
Calls can be made and received in the
normal way. You can use this option
only if entitled to do so. For details,
contact your service provider.
Preset
Sets the phone to use the group that
the SIM card owner has agreed upon
with the service provider.
N
OTE: This option is automatically
selected when the phone is switched
on or the SIM card is changed.
On
Sets the phone to use a particular
group. Calls can be made to or received
from the members of the selected
group only.
3If you selected On, key in the number of
the desired group (obtained from your
service provider) and press OK.
When a closed user group is selected,
and the group number are shown in the
middle of the display when the display is
clear. To see this indication when it is hid-
den e.g. by a profile name, press .
N
OTE:
• When calls are limited to Closed
User Groups, calls may be possible
to certain emergency numbers in
some networks (e.g. 112 or other
official emergency number).
• If you accidentally select a wrong
group, you may not be able to make
or receive any calls. In that case, re-
enter this function and give the cor-
rect group number.