Settings
To set up video sharing, you need person-to-person
and UMTS connection settings.
Person-to-person connection settings
A person-to-person connection is also known as a
Session Initiation Protocol (SIP) connection. The SIP
profile settings must be configured in your device
before you can use video sharing. Ask your service
provider for the SIP profile settings, and save them
in your device. Your service provider may send you
the settings over the air or give you a list of the
needed parameters.
To add a SIP address to a contact card, do the
following:
1. Press
, and select Contacts.
2. Open the contact card (or start a new card for
that person).
3. Select Options > Add detail or Share view.
4. Enter the SIP address in the format
username@domainname (you can use an IP
address instead of a domain name).
If you do not know the SIP address for the
contact, you can use the phone number of the
recipient, including the country code, to share
video (if supported by the network service
provider).
UMTS connection settings
To set up your UMTS connection, do the following:
● Contact your service provider to establish an
agreement for you to use the UMTS network.
● Ensure that your device UMTS access point
connection settings are configured properly.
Share live video or video clips
1. When a voice call is active, select Options >
Share video > Live video.
To share a video clip, select Options > Share
video > Recorded clip. A list of video clips
saved on the device memory or mass memory
opens. Select a clip you want to share. To
preview the clip, select Options > Play.
2. If you share live video, your device sends the
invitation to the SIP address you have added to
the contact card of the recipient.
If you share a video clip, select Options >
Invite. You may need to convert the video clip
into a suitable format to be able to share it. Clip
must be converted for sharing. Continue?
appears. Select OK.
If the contact information of the recipient is
saved in Contacts, and the contact has several SIP
addresses or phone numbers including the
country code, select the desired address or
122
Make calls