Filter
Top Products
through Bluetooth connectivity are indicated by
.
Remote SIM mode
Before the remote SIM mode can be activated, the
two devices must be paired and the pairing initiated
from the other device. When pairing, use a 16-digit
passcode, and set the other device as authorised.
To use the remote SIM mode with a compatible car
kit enhancement, activate Bluetooth connectivity,
and enable the use of the remote SIM mode with
your device. Activate the remote SIM mode from the
other device.
When the remote SIM mode is on in your device,
Remote SIM mode is displayed in the standby
mode. The connection to the wireless network is
turned off, as indicated by
in the signal strength
indicator area, and you cannot use SIM card services
or features requiring cellular network coverage.
When the wireless device is in the remote SIM mode,
you can only use a compatible connected
enhancement, such as a car kit, to make or receive
calls. Your wireless device will not make any calls
while in this mode, except to the emergency
numbers programmed into your device. To make
calls from your device, you must leave the remote
SIM mode. If the device is locked, enter the lock code
to unlock it.
To leave the remote SIM mode, press the power key,
and select Exit remote SIM mode.
Infrared
With infrared, you can transfer data (such as
business cards, calendar notes, and media files)
with a compatible device.
Do not point the infrared (IR) beam at anyone's eye
or allow it to interfere with other IR devices. This
device is a Class 1 laser product.
To send and receive data using infrared, do the
following:
1. Ensure that the infrared ports of the sending and
receiving devices are pointing at each other, and
that there are no obstructions between the
devices. The distance between the two devices
is not more than 1 meter (3 feet).
2. The user of the receiving device activates the
infrared port.
3. To activate the infrared port of your device to
receive data through infrared, press , and
select Tools > Connectivity > Infrared.
4. The user of the sending device selects the
desired infrared function to start the data
transfer.
40
Connections