Filter
Top Products
Control panel
105
Copyright © 2005 Nokia. All rights reserved.
To change the brightness of the display, tap <+> or
<->.
To define how soon the display brightness will go
down to save power if the screen is left untouched,
select the appropriate brightness period.
Tip: Selecting a low brightness level and a short time
period saves the battery and increases the operation
time of the smartphone.
To define how soon a screen saver starts if the screen
is left untouched, select the appropriate time limit for
the Screen saver time-out: option. Note that you cannot
change the look of the screen saver.
To set an automatic touch screen and keypad lock
on, select the Screen saver locks display & keys: check box.
The touch screen and keypad are locked automatically
when the screen saver is activated. For more
information, see “Touch screen and keypad lock” on
page 25.
Enhancements
Go to Desk > Control panel > Enhancements.
Here you can define some of the settings of the headset
and loopset used with the smartphone.
To modify the enhancement properties, tap Edit and
define the following:
Default profile: — Choose the profile that will be activated,
when you attach a headset or loopset to your
smartphone.
Automatic answer: — Define whether you want the
smartphone to answer an incoming call automatically
after five seconds time when a headset or loopset is
attached to the smartphone.
Internet setup
Go to Desk > Control panel > Internet setup.
To connect to the Internet:
• the wireless network you use must support data calls
or GPRS
• the data service must be activated for your SIM card
• you must have obtained an Internet access point from
your Internet service provider (ISP)
• you must have configured the proper Internet settings
Setting up an Internet access point
Based on the type of the SIM card you use your device
may be able to automatically add the correct settings for
WWW browsing and MMS. Some Internet service
providers may offer you the possibility to configure your
Internet access point settings by sending you a message.
This might reduce the number of settings you need to
enter yourself, or eliminate the need altogether. For more