Filter
Top Products
Telephone
40
Copyright © 2005 Nokia. All rights reserved.
Voice mailbox settings
For information on calling a voice mailbox (network
service), see “Calling” on page 36.
1 Press , and select Tools > Settings > Voice mailbox....
2 Define the voice mailbox number, and if you wish to
do so, the DTMF tone (voice mailbox password):
Number: — Write the voice mailbox number obtained
from your service provider.
DTMF: — Define DTMF tones for a voice mailbox. For
more information on DTMF tones, see “Sending DTMF
tones” on page 41.
If your SIM card supports the alternate line service, you
can define the voice mailbox settings for both lines.
Other settings
Press , and select Tools > Settings > Other settings....
Define the following:
Call page
Call waiting: (network service)— If you have activated the
call waiting service, the network will notify you of a new
incoming call while you have a call in progress. The option
Check status checks whether call waiting is activated or
not.
Send my caller ID: (network service) — Determines whether
your number is hidden or presented to the person you are
calling. The value may be set by your network operator or
service provider when you make a subscription (Set by
network).
Summary after call: — If you select the option On, the
approximate duration of a call will be displayed after the
call.
Automatic redial: — If you select the option On, and you call
a number that is busy or does not answer, the device
attempts to call the number automatically. The maximum
number of attempts is 10.
Reject with message: — If you select the option On, a text
box opens, where you can write a message that you can
send to a caller as a reply, whenever you mute an incoming
phone call. To modify the message afterwards, select the
option Edit message.
Line in use: (network service)— If your SIM card supports
the alternate line service, select the line you want to use.
Block line change: (network service) — If your SIM card
supports the alternate line service, and you select this
option, you cannot change the line in use. If you want to
change this setting, you must enter your PIN2 code.
Network page
Operator selection: — Allows you to change the way a
network is selected, and also to register to another
network. In automatic network selection, the device
selects the most appropriate network. In manual network
selection, the device searches for available networks and
presents you with a list of networks found. You can then