Copyright
©
2005 Nokia. All rights reserved.
Virtual private networking
130
When you connect to the VPN policy server address for the
first time, the VPN policy server is not trusted, so you must
authenticate the VPN policy server. You receive a VPN
policy server identity code from administrators.
To verify the identity of the VPN policy server,
carefully compare the VPN policy server identity code in
the VPN policy server identity code dialog with the code
that you receive from administrators, enter the missing
characters in Missing chars.:, and tap OK.
Note: If you install VPN policy server settings from a
SIS file, you do not have to verify VPN server identity
and this view never appears.
To authenticate to the VPN policy server, enter your
user name in User name: and password in Password: and
tap OK in the VPN policy server authentication dialog.
Administrators tell you the user name and password to
enter.
Tip: A policy server user name and password help
protect the VPN policy server from unauthorized
access.
VPN client enrolls a certificate for subsequent
authentication to the VPN policy server and installs VPN
policies on the smartphone.
Tip: Enrolling a certificate means sending a
certification request to a certification authority and
receiving a certificate.
You can now create VPN access points and associate them
with applications.
Editing VPN policy servers
In Policy servers, you can view, edit, synchronise, and
delete VPN policy servers.
To view or change the settings for a VPN policy
server, select the VPN policy server and tap Edit to
change:
• Server name: - name for the policy server. Policy servers
shows the new name.
• Internet access point: - Internet access point used to
connect to this VPN policy server.
If you deleted the access point that is associated with
the VPN policy server, Internet access point: shows the
text Not selected. If you deleted all access points, VPN
management cannot save the settings.
You cannot change Server address: after you install VPN
policies from the VPN policy server, because the VPN
policy server sends the address to VPN management
during the first connection.
To delete a VPN policy server, tap Delete.
To save the settings, tap Done.
Tip: To close the view without saving your changes,
press Esc key .
