Filter
Top Products
Visual Radio
87
Copyright © 2005 Nokia. All rights reserved.
Tip: You can also control the radio from the menu.
Press , select Radio and an appropriate menu
command.
To listen to the radio through the headset or
loudspeaker, make sure that the headset is connected
to the smartphone, press , and select Tools >
Speaker in use > Headset or Loudspeaker. The lead of the
headset functions as the radio antenna, so let it hang
freely.
To adjust the volume, tap and drag , or
press and .
To tune radio channels manually, tap or .
To search for channels automatically, tap or
. Searching stops when a channel is found.
To view available channels based on location, press
, and select Tools > Channel directory.... Select a
location and radio station. Visual Radio tunes to that
station automatically. To save the channel to a list of
preset channels, tap Save. See “Preset channels” on
page 87 for details. To view station details, such as the
visual service ID, tap Details.
To switch to stereo or mono output mode, press
and select Tools > Sound> Stereo or Mono.
Viewing content
To view available visual content, select the preset
channel, and tap . To stop viewing visual content,
tap . Note that you must have the correct visual
service ID defined and have Visual Radio service
enabled. See “Preset channels” below for details.
Preset channels
You can save up to 20 radio channels to Visual Radio.
To save a channel, tap and to tune in to a
station. Press , and select Channel > Save.... Select
a channel slot and write a name for the preset channel.
Change the frequency, if necessary. If the station
provides visual content, add the Visual Radio service
ID, and select the Enable visual service: check box to
allow for visual content.
Tip: To find the visual service ID of a channel, press
, and select Tools > Channel directory.... Select the
radio station, and tap Details.
To listen to a preset channel, tap on a channel in the
list view.
To edit a preset channel, press , and select
Channel > Edit....
To reorder preset channels, select a channel, press
, and select Channel > Reorder.... Select a channel
slot in the list. Press the centre of the scroll key to
confirm the move.
To remove a preset channel, press , and select
Channel > Delete.