Filter
Top Products
Getting started
17
Copyright © 2005 Nokia. All rights reserved.
selected. For more information, see “Profiles” on
page 43.
If the smartphone requests a PIN code, enter the code
(displayed as ****), and tap OK. The PIN code protects
your SIM card against unauthorised use and is usually
supplied with the SIM card. After three consecutive
incorrect PIN code entries, the PIN code is blocked, and
you must unblock it with a PUK code before you can use
the SIM card again. If the codes are not supplied with
the SIM card, contact the operator whose SIM card is
in your smartphone.
If the smartphone requests a lock code, enter the
code (displayed as *****) and tap OK. The lock code
protects your device against unauthorised use. The
factory setting for the lock code is 12345. Change the
code, and keep the new code secret and in a safe place
separate from your smartphone. The lock code can be
from 5 to 10 digits.
Note: Your smartphone has an
internal antenna. As with any other
radio transmitting device, do not
touch the antenna unnecessarily
when the smartphone is switched
on. Contact with the antenna
affects call quality and may cause
the smartphone to operate at a
higher power level than otherwise
needed. Avoiding contact with the
antenna area when operating the
smartphone optimises the antenna
performance and the battery life.
The picture shows how you should
hold your smartphone when talking
on the phone. The antenna area is
shown in grey.
First start-up
When you start up your smartphone for the first time, you
are asked to calibrate the touch screen and define certain
settings.
All the settings can later be modified in the Control Panel
application or in relevant applications.