Filter
Top Products
Control panel
111
Copyright © 2005 Nokia. All rights reserved.
General page
The settings on this page override all individual settings.
Define the following:
Position request rule: — Define the global privacy setting.
Select Use individual request rules to use the settings that
you define for each contact and service on the Individual
page. Select Confirm first to be prompted for the
acceptance of all location requests regardless of the
setting on the Individual page. SelectAlways acceptor
Always reject to accept or reject location requests
regardless of the settings on the Individual page.
Valid until: — Define the time limit for the acceptance or
rejection, if defined. When the time limit has been reached,
the privacy level switches to Use individual request rules.
Notify when position sent: — Define the global notification
setting. This option is only available, if you have set the
verification policy to Always accept.
Individual page
On the Individual page, you can define the privacy settings
for a specific contact or service.
The page consists of a list of contacts and services that
have specific privacy settings. When a contact or service
has requested a location, it may be added to the privacy
list. You can only add contacts to the list within this dialog.
To add a contact, tap Add, tap a contact in the list and
tap Close. Define the individual privacy settings. The
options are similar to ones defined on the Global page.
Tap Close to proceed.
To edit a contact, tap Edit, and modify the individual
privacy settings. The options are similar to ones defined
on the Global page. Tap Close to proceed.
For more information on selecting contacts, see “Viewing
and searching for contacts” on page 60.
RealPlayer settings
Go to Desk > Control panel > RealPlayer settings.
Define the following:
Network
Data speed::— Select the connection speed. Note that the
options Very fast and Slow may affect the video quality.
Connection time-out: — Select the time period in seconds
after which the connection closes, if the connection is not
successful.
Server time-out: — If the server is not able to send enough
data and a lot of buffering takes place, you may need to
define a server time-out.
Port range: — The range of port numbers used for the
connection. The default values are the same as those for
Internet settings.