Filter
Top Products
Telephone
42
Copyright © 2005 Nokia. All rights reserved.
automatically if there is no DTMF string for the call in
Contacts.
To enter DTMF tones manually during a call, tap
New call or press > View > Dialler to open the
Dialler view. Enter the DTMF string.
Tip: There are 2 special characters that you can use by
double-tapping * on the keypad:
• p (pause) — Causes a three-second pause
between the digits in a DTMF tone string. All
digits that follow the pause are treated as
DTMF tones.
• w (wait) — Pauses the sending of DTMF digits
until you tap Send. The rest of the string is
sent to the network. All digits that follow the
wait are treated as DTMF tones.
You can add DTMF tones to the DTMF field in a contact
card.
Tips for efficient use of Telephone
• The silent indicator is displayed in the status
indicator area when you have set the Silent profile to
active. Tapping this indicator will open a dialog where
you can change the profile. The indicator is removed
from the status indicator area when you activate a
profile other than 'Silent'.
• In the call handling view, press during a call to
put the current call on hold or to activate a held call.
When you are not on a call, press to bring up the
last dialled calls list.
• In the speed dial view, you can drag the assigned speed
dial buttons with the stylus to reorganise them. The
fixed voice mail button cannot be moved.