A SERVICE OF

logo

Open as PDF
next previous
val:
.07 to 150%
+31.55 to -1.76dB
Remarks:
If the Cal factor source is set to manual, this is the calibration factor
number used.
Example:
CFCAL A, %, 99
Sets the calibration factor to 99% for sensor A.
CFCAL A, DB, 0.2
Sets the calibration factor to .2 dB for sensor A.
Query:
CFCAL? <s>
Returned
String:
CFCAL <s>,<units>,<val>
CFFRQ Cal Factor Frequency value
SENSOR
Syntax:
CFFRQ <s>, <value>[units]
s:
A or B
value:
10 kHz to 122 GHz
Remarks:
Sets the frequency used to look up the correction data from the sensor`s
internal table.
Examples:
Both of the following examples set the frequency for cal source frequency
to 25 GHz for sensor A.
CFFRQ A,25E9
CFFRQ A,25GHZ
Query:
CFFRQ? <s>
Returned
String:
CFFRQ <s>,<value>
CFSRC Cal factor source
SENSOR
Syntax:
CFSRC <s>,<source>
s:
A or B
source:
FREQ
MAN
VGHZ
Remarks:
Sets the source of the calibration factor. Frequency uses the internal EE
-
PROM calibration factor value in the sensor, from the frequency set by the
CFFRQ number. Frequencies between Cal Factor data points are interpo
-
lated linearly to 0.01 dB resolution.
6-22 ML2430A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION