An optional rear panel Calibrator connector is offered as an alternative (see Fig
-
ure 3-2). If the rear panel connector option is installed, the front panel connector
is not installed. Refer to Chapter 5, Procedures, for information on using the Cali
-
brator output.
Sensor A
Connector
This connector is a 12-pin circular precision connector to be used in conjunction
with power sensor cables. An optional rear panel Channel A connector is offered
as an alternative (see Figure 3-2). If the rear panel connector option is installed,
the front panel connector is not installed.
Sensor B
Connector
(ML2438A only)
This connector is a 12-pin circular precision connector to be used in conjunction
with power sensor cables. An optional rear panel Channel B connector is offered
as an alternative (see Figure 3-2). If the rear panel connector option is installed,
the front panel connector is not installed.
NOTE
Only MA2400A Series sensors can be connected directly
to the ML2430A Series Power Meters. MA4700A and
MA4600A Series sensors require the MA2499A or
MA2499B Anritsu Sensor Adapter. MP-Series (10-pin)
sensors require an MA4001A or MA4002B adapter and
an MA2499B.
3-3
REAR PANEL
CONNECTORS
The Rear Panel connectors are illustrated and described in Figure 3-2.
.
3-2 ML2430A OM
REAR PANEL CONNECTORS CONNECTIONS
