Anritsu ML2430A Manual

A SERVICE OF

next previous

Reference Oscillator = Off

Active entry channel = A

Measurement units = Watts

REL mode = off

Measurement parameters (set for Sensor A and Sensor B):

Cal Factor = 100.0%

Cal Adj = 100.0%

Offset = 0.00 dB

RA Auto Range

Syntax:

RA

Remarks:

Sets the ML2430A Series to automatically select the correct range for the

measurement.

RC Recall setup

Syntax:

RC<val>EN

val:

1 to 10

Remarks:

The ML2430A Series can store up to 10 instrument configurations for con-

venient recall. The configuration parameters stored are the same parame-

ters the ML2430A Series stores in its own *SAV and *RCL commands.

Therefore, RC is equivalent to *RCL, and ST is equivalent to *SAV.

Selecting Register 0 always restores the previous power meter configura

-

tion, providing an expedient way to recover from an entry error.

RH Range hold

Syntax:

RH

Remarks:

Hold the power meter in the current range. The differences in sensor

ranges must be taken into account when the ML2430 is being used to em

-

ulate the HP 438.

RL Relative mode

Syntax:

RL<mode>

6-124 ML2430A OM

HP 438A EMULATION COMMANDS GPIB OPERATION