A-4 ML2430AOM
SYSTEMSPECIFICATIONS APPENDIXA
Cal Factor Volt
-
age
Input
(BNC):
Operating Modes:
Voltage:Display voltage reading on selected channel.
Voltage proportional to frequency for sensor calibration
factor compensation.
Blanking Input:TTLlevels only.Selectable positive or
negative polarity.
Input Range: 0
to 20V
Resolution: 0.5 mV
Control:
Adjustable voltage to frequency relationship
Analog
Output (BNC):
Two outputsconfigurableto Log or Lin
Operating
Modes:
Analog Out:Selectable channel adjusted for calibration
factors and other power reading correction settings.
Pass/Fail:SelectableTTLHigh or Low
Channel output:Near real time analog.Uncalibrated.
AC Modulation Output:Output 1 only.
Output Range:
–5.0 to 5.0V
Resolution:
0.1 mV
Trigger Input:
Operating
Modes:
External TTL or RF Blanking.
GPIB Interface:
IEEE-488.2 and IEC-625. Implements AH1, SH1, T6,
LE0, SR1, RL1, PP0, DC1, DT1, C0 and E1.
RS232:
Supports software download and GPIB commands.
Parallel Printer
Output:
Compatible with HP Deskjet 540 and 310 Models other
500 Series and 300 Series and later are typically com
-
patible.Also Canon BJC 80.See printer manual for DIP switch
settings.
General Specifications
General:
MIL-T28800E, Type 3, class 5, Style E
