Filter
Top Products
9 - 3
Modifying Menu Configuration Files
Menu configuration files can be modified in EZConfig Editor on the workstation or the terminal
For details:
See EZConfig Editor on page 2-2. If modified on the workstation, the *Menu.exm file must be deployed
to the terminal.
See EZConfig Editor on the Terminal on page 2-27.
Creating Menu Configuration Files
Use the Default EZMenu Configuration Files (see page 9-1) to create new menu configuration files.
1. On the workstation, navigate to the C:\Program Files\Honeywell\Power Tools and Demos\EZConfig
Editor folder.
2. Open a sample menu configuration file in EZConfig Editor.
3. Tap File > Save As and save the file with a new name ending in “Menu.exm.”
4. Modify the file; to see the available values, see Menu Configuration File Sections on page 9-3.
5. Save or transfer the file to the
\IPSM (\Honeywell for 6100/6500) folder on the terminal.
Menu Configuration File Sections
Menu configuration files contain of two basic sections: Settings and MenuEntries. Both sections are
locked, which means only their Values can be changed.
Settings Section
The Settings section defines general EZMenu settings. The keys in this section are locked, which means
that only their Values can be changed.
Key Description Default
Value
Available Values
Sig Identifies this file as a menu file. EZMen
u
These keys are read-only and
cannot be changed.
Version This is the EZMenu version number. 1
EnableDebug Enables system debugging. 0
0=Disable
1=Enable; an Easymenu.log file is
created in the \IPSM
(\Honeywell for
6100/6500)
folder.
ListViewMode Determines the default view mode for the
window. For details, see View Options on
page 1-4.
3
0=Detail
1=List
2=Small Icon
3=Large Icon