Filter
Top Products
3 - 4
Security Section
The Security section has no keys but two child sections: Supplicant and Non Supplicant.
Supplicant Use this section to configure the WLAN radio on Dolphin 7850 terminals; see Supplicant
Section–Dolphin 7850 on page 3-4.
NonSupplicant Use this section to configure the WLAN radio on Dolphin 7900 and 9500 terminals; see
NonSupplicant Section–Dolphins 7900 and 9500 on page 3-6.
Supplicant Section–Dolphin 7850
The Supplicant section consists of a number of child sections. The default child section is named Profile1
and contains all the keys necessary to create a configuration profile for the WLAN radio.
To create multiple radio configurations, copy the Profile1 section and paste it at the root level of the
Supplicant section. Then, rename that profile and configure the keys according the desired network
configuration. Each child section name is arbitrary, but each name must be different.
The Supplicant section contains one key named ActiveProfile. Type in the Value equal to name of one
of the desired profile child sections.
When DeviceConfig is activated on the terminal, the terminal will apply the settings in the profile specified
in the ActiveProfile key. If the ActiveProfile key does not have a matching profile, the radio will be enabled
by DeviceConfig but no specific radio configuration will be activated, which means that the radio will not
connect to your network.
Profile Subsections–Dolphin 7850
Each Profile subsection contains the keys that configure the radio connection from the terminal to the
network.
Key Description
Default
Value
Available Values
SSID The service set identifier used to
connect to network; usually the network
name of the access point or peer station.
N/A
X=Your network’s SSID
Any=Connect to any network
Assoc. Mode The general association mode
(sometimes called “authentication”) of
the radio.
N/A
• None (no authentication or
encryption)
•WEP
• IEEE 802.1X
• WPA-Personal (PSK)
• WPA-Enterprise (EAP)
• WPA(2)-Personal (PSK)
• WPA(2)-Enterprise (EAP)