Filter
Top Products
3 - 16
Command Line Arguments
/q Quits the program; this command line in the Args field of the Associated Application window
stops the confirmation message from appearing after DeviceConfig.exe finishes
processing.
/boot Reboots DeviceConfig.exe
DeviceName Mandatory when NameType is set to 2.
This is the custom name of the device.
N/A X=Custom name can contain
customized macros; e.g.,
“%AUTONUM%”
DeviceClass Optional
The rule tag of the Add devices rule.
When the rule tag is not specified here,
the device will use an Open, Add
devices rule.
N/A X=The specific rule tag. Please refer
to MobiControl Help on how to
create an open rule.
DeviceIDType Optional
Specifies what is used for the device ID.
3 1=HAL Old Device ID
2=HAL New Device ID
3=HAL UUID
4=User Defined
5=Server specified
6=MAC
Info Subsection
SiteName Mandatory
This is the site name of the MobiControl
Server
N/A X=MobiControl Server name
Method Mandatory
The installation method.
1 1 (Honeywell standard)
Comm Subsection
Broadcast Optional
Enable broadcasting for discovering
server addresses.
0 0=Disable
1=Enable
RetryDelay Optional
Retry delay time when connection to the
server fails.
30000 X=Milliseconds
Connection Subsection
DeploySvr1 Mandatory when Broadcast key is
disabled.
This is the MobiControl Server IP
address and port.
N/A X=IP address:port
e.g., 192.168.1.238:5494
Key Description Default
Value
Available Value