Filter
Top Products
Managing Your Pocket PC Phone 85
3. Turn off the external viewing device and then unplug the power cord.
4. Disconnect the VGA cable’s smaller end from the device and then
disconnect the external viewing device’s cable from the VGA out
cable.
To configure the button using Task Manager
You can configure the button to shut down running programs and free
up the memory space that’s occupied by them.
1. Tap Start > Settings > System tab > Task Manager.
2. On the Button tab, select the Enable the “X” button to end running
programs check box.
3. Choose the action for shutting down programs (by tapping the
button, tapping and holding the button, or both).
4. Tap OK.
Note When the Enable the “X” button to end running programs check box is not
selected, tapping the “X” button will only close a program screen. The program is not
ended and continues to run in the background.
To reassign programs or shortcuts to program buttons
Your device may come with programs already assigned to hardware
buttons. You can customize these buttons to open the programs you
use most, or to perform certain shortcuts such as changing the screen
orientation, opening the Today screen, or opening Input Panel.
1. Tap Start > Settings > Personal tab > Buttons.
2. A list of buttons and their current assignments are displayed on the
Program Buttons tab.
3. Tap the button you want to reassign. To help you identify the buttons,
there are numbers and icons representing the original function of the
button.
4. In the Assign a program box, tap the program or shortcut you want
to assign.
5. Tap OK.