Filter
Top Products
13-12 Detailed menus list
Change access codes (Menu 5 6)
Within this submenu, you can change the fol-
lowing access codes: lock code (Menu 5 6 1), PIN
code (Menu 5 6 2), PIN2 code (Menu 5 6 3),
Network password (Menu 5 6 4). See Chapter 10
"System: Security" on page 10-2.
Note: The access codes may only include digits
0 to 9.
Closed user group (Menu 5 7)
This network service allows the restriction of out-
going calls to and incoming calls from a selected
group of people. For details on creating a user
group and activating this service, contact your
network operator. You may be a member of up to
10 user groups (the groups need not necessarily
be assigned numbers from 1 to 10).
Select one of the following options:
None — Calls can be made and received in the
normal way. This option overrides all other
user group settings. You can use this option
only if you are entitled to do so.
Preset — Use a preferential user group that
the SIM card owner has agreed upon with the
network operator.
Set— Use a particular user group. Calls can be
made to or received from the members of the
selected group only.
System lock (Menu 5 8)
When the system lock is activated in this menu,
the communicator will lock immediately. Even if
you remove and replace the battery and switch
on the phone interface, the communicator will
remain locked.
The communicator can also be locked automati-
cally if the Autolock period is turned on in the
communicator interface (see Chapter 10 "System:
Security" on page 10-2).
To lock the communicator:
• Press Select to activate the lock code
prompt.
‚ Enter the lock code. The communicator locks
immediately.
To unlock the communicator, press Unlock and
enter the lock code.
Note: To prevent the communicator from locking
itself again after the time-out period, de-
activate the option in the Security applica-
tion settings (see Chapter 10 "System:
Security" on page 10-2).
Duration and cost (Menu 6)
Within this menu, you can view the duration and
cost of your outgoing and incoming calls, reset
the timers and counters, limit the duration of
calls and select whether the call costs are shown
in charging units or units of currency.
Note: The actual time invoiced for calls and ser-
vices from your service provider may vary,
depending upon network features, round-
ing-off for billing, taxes and so forth.
Call duration (Menu 6 1)
The communicator provides two call timers
which help you monitor the duration of your
calls.
Last call duration (Menu 6 1 1)
Shows the duration of the last, or current, out-
going or incoming call in hours, minutes and
seconds, e.g., 00:02:15.
Note: The duration of incoming calls is not dis-
played when you are within your home
network.
All calls duration (Menu 6 1 2)
Shows the total cost of all calls made or received
with any SIM card that you have used with the
communicator.
Clear timers (Menu 6 1 3)
Resets all timers.
Note: There is no way to undo the reset operation.