Filter
Top Products
2-10 Indicators
Indicators
The application icon and the application name
show the currently active application, i.e., the
application you are in at the moment.
The icons which appear on the Call status and In-
box/Outbox indicator rows, change according to
the application and current situation. The battery
level and field strength indicators are the same as
are shown on the phone interface display when
the phone interface is on (see Chapter 13 "Phone
interface: Display indicators" on page 13-2).
Call status
– You have a voice call and the hands-
free loudspeaker and microphone are
on. In handsfree use, you can talk to
the phone from a short distance
away (see Chapter 4 "Telephone:
Telephone settings" on page 4-1).
– A voice call with the handsfree off
(the loudspeaker and microphone
are muted).
– An open data connection, see Chap-
ter 7 ”Internet” on page 7-1.
– The communicator is receiving or
sending a fax, see Chapter 5 ”Fax”
on page 5-1.
– The communicator is connected to a
PC, see Chapter 10 "System: Con-
necting to a PC" on page 10-6.
– The communicator is being used as a
fax modem, see Chapter 10 "System:
Fax modem" on page 10-5.
– The communicator is being used in
the silent service mode, see Chapter
4 "Telephone: Telephone settings"
on page 4-1.
– The communicator is in flight mode.
– The communicator is trying to es-
tablish an infrared connection, see
Chapter 10 "System: Connecting to
a PC" on page 10-6.
– An infrared connection has been
established.
– The infrared connection is obstructed.
Inbox/Outbox
– Inbox (left half). You have received a
fax, short message or e-mail (if your
Remote mailbox is capable of send-
ing this information). Received faxes
and short messages go in the appli-
cation’s received documents folder.
To retrieve new e-mail, you must
connect to your Remote mailbox, see
Chapter 7 "Internet: Receiving e-mail
- Reading e-mail" on page 7-9.
– Outbox (right half), the sending
buffer contains all unsent messages:
see Chapter 12 ”Document outbox”
on page 12-1.
– Time and date are shown when the
Call status and Inbox/Outbox rows
are empty. Time and date can be
adjusted in the Clock settings, see
Chapter 11 "Extras: Clock - Clock
settings" on page 11-5.
Application icon
Application name
Call status
Inbox/Outbox
Battery level
Field strength